| Customization: | Available |
|---|---|
| Type: | Sensor |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CHANNEL1-2 | Displacement 1-2 channel raw signal |
MODULEOK | Indicates that the monitor is working properly |
FAULT | Protection fault, indicating that a certain problem is hindering the normal operation of the system |
USERINHIBIT | Intentionally setting the relay to prohibit operation |
BYPASS | Bypass indicator light |
RX/TX | Indicates Ethernet status and communication between the monitor and remote software |
RELAY1-4 | Indicate whether relay 1-4 is activated |
RESET | Reset button |
DANGER | Hazard indicator light |
ALERT | |
INFO/CONTRST Embedded button function | Alarming |
Alarming | 1: Display user account/password, IP address, firmware/hardware version number: Click once 2: LCD brightness adjustment: Long press 2-3 seconds on the display interface to adjust 3: Reset default settings: User account name, password, network status, press and hold for 5 seconds |
DisplacementInput Channel | 2 channels, can be connected to grating & POT linear & eddy current & LVDT linear displacement sensors |
Sampling frequency: synchronous acquisition, 6.4KHz per channel | |
Input voltage range: ±25V , overvoltage protection ± 60V | |
Can provide -24V power supply | |
Accuracy : ±0.1/Unit | |
Transmitter output | 2-way 4-20mA |
Accuracy: 0.5% | |
Load capacity: 0-500Ω | |
Relay output | 4 groups of relay configurable outputs (SPDT) |
Contact capacity: 220VAC/5A, 125VDC/2A | |
Buffered output | 1 channel shift channel buffer output |
Working power supply | DC24V power consumption ≤6W |
Data output interface | Ethernet (IP configurable ) |
Support RS485 serial port output and compatible with standard ModbusRTU protocol | |
Scope of work | -20℃~60℃, 5%~95% relative humidity, non-condensing |
Dimensions and weight | 150×122 , less than 1kg |
Installation | 35mm rail installation |
Sensor Type | Sensor type can be set to grating & POT linear & eddy current & LVDT linear displacement sensor |
Standard sensitivity | Sensor standard sensitivity |
Actual sensitivity | Use sensor sensitivity |
Test Unit | mm/mils |
Range setting | Set the upper and lower limits |
Relay related settings | Related/Not Related |
Alarm/danger value settings | Set alarm danger value |
Alarm mode setting | Automatic/Automatic |
4-20mA calibration | Calibrate 4-20mA output |
IP Settings | Setting IP |
){kind=link}